Here at Statfold Engineering we can grind cranks up to a length of 1.5 metres and a thow of 6 inches whilst maintaining an accuracy of 0.0002 inch throughout the grinding process. All ground surfaces are highly polished to achieve the best surface finish. It is the engine builders responsibility to ensure that all galleries and oils plugs are thoroughly cleaned before final fitting.

We can also internal grind parallel and taper bores to a tolerance of 0.0002 inch ranging from a 3 inch bore to a 6 inch bore and a depth of 4 inches.


something we can help with?

call 01827 839468